Revelation

I making prints now; I've always known about this. My ex-girlfriend Beth and I had talked about this for years, and she had been working on that process for a long time. How to sell other works in tandem with a passive revenue stream from T-shirts, posters, and prints based upon original pieces of work.

Sady Starkiss Sticker “Blast Off!” on external memory drive.

My friend, the tattooist, had given me some information about a printer down in downtown Portland that I might want to get a hold of for making prints looking into that so I can see if I can make cheaper prints than where I'm going out right now. I need to get the cost of those prints down so I can make more of the artwork. Suppose I get more of my prints made out over social media. In that case, I can start swinging other ways from having to actually work out a 9-to-5 job and actually start making money off of passive income rather than active income. That was the most significant point that was a revelation to me. I've been fighting it and fighting it and fighting it for a long while now. I realize I could actually make more money off of making prints off of my work and making original pieces all the time, and then I can spend more time making original pieces there for making prints and then go from there.

The biggest thing that my friend also pointed out to me at the show was that they were the other artists I didn't see there at the opening. I was the only one there.

In the process, my artwork also stood out from the others on the wall, knowing this was his description, not mine. But massive black-and-white pieces have a tendency to stand out amongst most of the color stuff, so they definitely stood out.

At the same time, a lot of extra work was done on each one of these pieces, whether it be an 8 x 8, a 12 x 16, or an 18 x 24.

Baby Blue Escape. 8”x8” Scratchboard.

People can see the effort that's done in these individual pieces of work. That's the reason why my stuff has a tendency to grab people's attention. My friend had also mentioned to me that if you're doing the work just to crank stuff out, that's one thing. Still, if you're doing it because you're driven to it, which I know I am, I love working on the artwork; it makes me feel creative and whole and gets a lot of ideas out of my head on the paper or on the board in this case.

A whole mess of 8”x8” pieces being prepped for work.

Remember, I have often talked about in previous posts how some artists are stuck in the creative mode and are not trying so much to work on figuring out how to sell themselves. That's where I've been. I need to branch out if I'm ever going to make it as a successful artist. I need to branch out and start focusing on how to not only crank stuff out, putting great ideas out there but allowing pieces to breathe, and that means making prints, T-shirts, posters, and stickers.

Blue The Bulldog Sticker.

Talks, show and revelations

The biggest thing that my friend also pointed out to me at the show was that they were the other artist I didn’t see there at the opening I was the only one there

In the process also was how the artwork stood out from the others on the wall know this was his description not mine. But black and white, especially big, black and white pieces have a tendency to stand out amongst most of the color stuff so they definitely stood out.

12”x16” “Love Machine” now owed by a new collector. Goodfoot Lounge Art Opening Feb 29th, 2024.

At the same time also, there’s a lot of extra work that were done on each one of these pieces whether it be an 8 x 8, a 12 x 16, or an 18 x 24.

People can see the effort that’s done in these individual pieces of work. That’s the reason why my stuff has a tendency to grab people’s attention. My friend had also mentioned to me that if you’re doing the work just to crank stuff out, that’s one thing, but if you’re doing it because you’re driven to it, which I know I am, I love working on artwork, it makes me feel creative and whole and gets a lot of ideas out of my head on the paper or on the board in this case. 

So many more pieces left to mount on wood and varnish. Sorry about the mess. Y’know artists.

Remember have often talked about in previous posts, how are some artists are stuck in the creative mode and not so much and trying to work on figuring out how to sell them selves. That’s where I’ve been. I need to branch out if I’m ever going to make it as an a successful artist I need to branch out and start focusing on how to not only crank stuff out putting great ideas out there but allowing pieces to breathe, and that means by making prints, T-shirts, posters, and stickers. StickerMule

I think that the show was exactly what I needed to have happen to kick me in the ass and start moving again instead of sitting in my little hole coming out from time to time and get some notice.

Who is Sady Starkiss?

Simply put, Sady Starkiss was a product of a conversation and a single commission.

In this commission, the idea was to have what my friend referred to as a "Space Nubile." And that was as much information as he gave me. He wanted something with the '50s feel to it. So, I combined a classic Vargas girl pinup and a Wally Wood space girl.

I'm a sucker for old 50s pinup girls, to begin with. And Wally Wood had such a flair for the ladies of the time.

A questionable combination, but I needed the challenge of something new and not just my traditional superhero schlock. I ended up with an old-school control console and some deft gravity-defining clothing. The inside joke was Sady couldn't keep her clothes on.

Of course, this commission led right to the creation of Heavy Metal (an old-school robot based on the old black and white movie The Mysterious Doctor Satan).

Then there was talk of a crossover between the two. There have been a couple, but the best of the crossovers between the two was the piece called "Blast Off!".

Of course, there is also the crossover call entitled "Oh Yeah?" between heavy-metal and CD star kiss, dealing with a Fu Manchu type of character. Even mentioning that there was a Fu Manchu type of character would get me in trouble with people of today, so I will plan on redesigning my version of Fu with a slight change to color and look. He will be villainous, though. That's a mainstay of the character.

But back to Sady.

Initially, she was just eye candy, to be honest, but as I continued to draw her in different situations, I realized that I needed something more for her. I wanted a personality that would encompass her physically with some of her other mental attributes.

I wanted a strong woman who could fight when push came to shove and yet now always overpower her "detractors."

Another female character I found to be of interest is Una Persson from the Micheal Moorcock fantasy series. I felt she was someone I could base some of Sady on.

So I wanted her to be sexy and adventurous. She is the pinnacle of what my Fu Manchu character is looking for, and Heavy Metal always gets in the way. Of course, others want to be with her as well. Robot Monster is one; Corpse Cop is another.

And all of this chaotic craziness is going to be rendered in scratchboard.

What else?